![]() ![]() Insert the new card into an external card reader and attach it to the Pi.I was going from a 32GB SD-Card to a 128 GB Card. The following worked for me, with an SD card that was originally prepared with NOOBS. ![]() How do I transfer my setup between SD cards?.How can I resize my / (root) partition?.Find the root, stretch it, resize the filesystem and enjoy your new space (and a 16GB image you need to back up). Note that depending on your distribution of choice and version, the card may be set up in different ways and the instructions might not be correct to the letter. This should all work from the running Linux system on the PI, so as long as you can get the image on the card correctly in windows, it shouldn't be a problem anymore. Raspi-config can apparently also do this automatically.Įssentially you should be able to use parted, fdisk, cfdisk or other tool to resize the root partition and use resize2fs to make the filesystem use the extra space. There's also a page on resizing partitions on rpi. Some instructions on how to set up a card image can be found on the RPI wiki "easy SD card setup". Once you get a second card and as long as you don't destroy the original one, it should be easy to experiment. I think you should look into doing this so you can take and restore backups of your card from time to time. Im open to any suggestions, just would rather not have to start from scratch with a fresh raspbmc install. I suppose I could load raspbian on the 2GB after I copy the image to the 16GB to get a more functional linux box but hopefully that's more work then necessary. The problem is, I only have windows PC's available to me. Is this possible without deleting the contents of that partition? Looking here I see that the ext4 partition at /dev/mmcblk0p3 is the one that would need re-sizing. However this would then leave only 2GB available to the pi on the 16GB correct? Essentially I am wondering how one would go about re-sizing the partition to use all of the available space on the 16GB SD. My first thought is use Win32 Disk Imager to read from the 2GB and then write to the 16GB. I now I have a 16GB class 10 in the mail and am wondering how to go about copying my current setup to that SD. I loaded raspbmc and then spent time loading repositories, add-ons and customizing to my liking. I couldn't hold off playing with it so it had to do for the time being. * 400 MB available hard disk space for installation * 2 GHz Intel® Pentium®4 processor, AMD Athlon 64 or better Next Limit Maxwell Render 2.5.So I got my new pi and the only free SD I had was 2GB. Fixed draft mode was not saving the image to disk (RS0 just saves a image file, not a MXI).Fixed now draft mode disables multilight internally.Fixed potential crash with SSS and shadow channel.Fixed emitters with displacement could fail.Fixed overall darkness in channels using Blow up camera.Fixed vignetting was not working in draft mode.Fixed emixer maximum number of frames was not properly loaded when loading emixer files.Fixed RealFlow toolkit module was sometimes loaded incorrectly.Fixed environment EXRs with alpha were rendered incorrectly.Improvements in the two color interpolation in sky dome background. ![]() Fixed some ies files with incorrect format were failing.It is possible now applying an emixer file to a sequence of MXI files Fixed dodevignetting commmand line parameter. ![]()
0 Comments
Leave a Reply. |